Sourashree Equipments in Howrah / Kolkata / Burdwan has a wide range of products and / or services to cater to the varied requirements of their customers. The staff at this establishment are courteous and prompt at providing any assistance. They readily answer any queries or questions that you may have. Pay for the product or service with ease by using any of the available modes of payment, such as Cheques. This establishment is functional from 10:00 – 19:00.
SERVICE HOURS
Monday:- 10:00 Am – 7:00 Pm
Tuesday:- 10:00 Am – 7:00 Pm
Wednesday:- 10:00 Am – 7:00 Pm
Thursday:- 10:00 Am – 7:00 Pm
Friday:- 10:00 Am – 7:00 Pm
Saturday:- 10:00 Am – 7:00 Pm
Sunday:- Closed
BONFIGLIOLI MAKE INLINE HELICAL TYPE GEAR MOTOR—AS SERIES
AS Series-Helical In-Line Gear motors & Units
Key benefits
– Minimized mounting space
– Reduced installation space and wide output speed selection range
– Reduced standard backlash
– Highly dynamic, energy-saving solution
– Wide output speed selection range
Main options
Surface protection up to C5
Reinforced bearings
Reduced backlash
Torque arm
Fluoroelastomer oil seals
Double oil seasonal input
Taconite seals
Torque range
50 … 12,000 Nm (442 … 106,208 in-lb)
Gear ratios
4.34 … 202.1
Transmissible Mechanical Power
0.09 … 222 kW
Mounting position
Feet mounting
Flange mounting
Motors
Input with solid shaft
Input with e-motor coupling:
– BN, BE, BX [IEC asynchronous]
– BSR [IEC reluctance]
– BS [IEC single phase]
Motor options
Thermistors and thermostat sensors
Independent forced cooling
Incremental, sin/cos absolute single/multi-turn encoders
Tropicalization
Anti-condensation heaters
Backstop
BONFIGLIOLI MAKE WORM HOLLOW TYPE GEAR MOTOR—VF SERIES
VF/W Series-Universal Worm Gearmotors& Units
Key benefits
– Cost effective solution
– Low noise
– High peak load capacity
– Minimized mounting space
– Long operating life
– High reliability
– High number of possible configuration
– Wide output speed selection range
– Wide output torque selection range
– ATEX gearbox for explosive environnements 2G/2D
Main options
Up to C5 Surface protection
Short flange & reinforced bearings
Torque arm
Fluoroelastomer oil seals
Torque range
13 … 7,100 Nm (115 … 62,840 in-lb)
Gear ratios
7 – 300 … 2,300
Certifications
Certificate of compliance
Inspection certificate
ATEX
Transmissible Mechanical Power
0.04 …75kW
Output
Keyed hollow shaft
One or double sided solid plug-in output shaft
Torque limiter
Motors
Input with solid shaft
Input with e-motor coupling:
– BN, BE, BX [IEC asynchronous]
– BSR [IEC reluctance]
– BS [IEC single phase]
Motor options
Thermistors and thermostat sensors
Independent forced cooling
Incremental, sin/cos absolute single/multi-turn encoders
Tropicalization
Anti-condensation heaters
Backstop
BONFIGLIOLI MAKE WORM HOLLOW TYPE GEAR MOTOR—W SERIES
VF/W Series-Universal Worm Gearmotors& Units
Key benefits
– Cost effective solution
– Low noise
– High peak load capacity
– Minimized mounting space
– Long operating life
– High reliability
– High number of possible configuration
– Wide output speed selection range
– Wide output torque selection range
– ATEX gearbox for explosive environments 2G/2D
Main options
Up to C5 Surface protection
Short flange & reinforced bearings
Torque arm
Fluoroelastomer oil seals
Torque range
13 … 7,100 Nm (115 … 62,840 in-lb)
Gear ratios
7 – 300 … 2,300
Certifications
Certificate of compliance
Inspection certificate
ATEX
Transmissible Mechanical Power
0.04 …75kW
Output
Keyed hollow shaft
One or double sided solid plug-in output shaft
Torque limiter
Motors
Input with solid shaft
Input with e-motor coupling:
– BN, BE, BX [IEC asynchronous]
– BSR [IEC reluctance]
– BS [IEC single phase]
Motor options
Thermistors and thermostat sensors
Independent forced cooling
Incremental, sin/cos absolute single/multi-turn encoders
Tropicalization
Anti-condensation heaters
Backstop
BONFIGLIOLI MAKE WORM HOLLOW TYPE GEAR MOTOR—W / VF SERIES
VF/W Series-Universal Worm Gearmotors& Units
Key benefits
– Cost effective solution
– Low noise
– High peak load capacity
– Minimized mounting space
– Long operating life
– High reliability
– High number of possible configuration
– Wide output speed selection range
– Wide output torque selection range
– ATEX gearbox for explosive environnements 2G/2D
Main options
Up to C5 Surface protection
Short flange & reinforced bearings
Torque arm
Fluoroelastomer oil seals
Torque range
13 … 7,100 Nm (115 … 62,840 in-lb)
Gear ratios
7 – 300 … 2,300
Certifications
Certificate of compliance
Inspection certificate
ATEX
Transmissible Mechanical Power
0.04 …75kW
Output
Keyed hollow shaft
One or double sided solid plug-in output shaft
Torque limiter
Motors
Input with solid shaft
Input with e-motor coupling:
– BN, BE, BX [IEC asynchronous]
– BSR [IEC reluctance]
– BS [IEC single phase]
Motor options
Thermistors and thermostat sensors
Independent forced cooling
Incremental, sin/cos absolute single/multi-turn encoders
Tropicalization
Anti-condensation heaters
Backstop
BONFIGLIOLI MAKE SHAFT MOUNTED GEAR MOTOR—F SERIES
F Series– Helical Parallel-Shaft Gearmotors& Units
Key benefits
– High mounting flexibility
– Minimized mounting space
– Robustness
– Reduced standard backlash
– High dynamic and energy saving solution
– Wide output speed selection range
– (ATEX) gearbox for explosive environnements 2G/2D
Main options
– Backstop
– Reduced backlash
– Lateral holes for side mounting
– Torque arm (with anti-vibrating bushings)
Torque range
140 … 14,000 Nm (1,239 … 123,910 in-lb)
Gear ratios
6.4 … 2,099
Transmissible Mechanical Power
0.09 … 123 kW
Output
Keyed hollow shaft – Two dimensions for each size
Keyless shrink disc fitting
Plug-in solid output shaft as an option
Quick fit
Motors
Input with solid shaft Input with e-motor coupling.
BONFIGLIOLI MAKE BEVEL HELICAL GEAR MOTOR—“A” SERIES
A Series–Helical Bevel Gearmotors& Units
Key benefits
– Minimized mounting space
– Wide output speed selection range
– Reduced standard backlash
– High dynamic and energy saving solution
– Wide output speed selection range
– ATEX gearbox for explosive environnements 2G/2D
Main options
Surface protection up to C5
Reinforced bearings
Reduced Backlash
Torque Arm
Fluor Elastomer oil seals
Double oil seals on input
Taconite seals
Torque range
100 … 14,000 Nm (885 … 123,910 in-lb)
Gear ratios
4.9 … 1,715
Transmissible Mechanical Power
0.22 …150Kw
Output
Feet and shaft mount with two bore options per size
Solid shaft, splined hollow shaft, hollow shaft with shrink discs
Motors
Input with solid shaft
Input with e-motor coupling:
– BN, BE, BX [IEC asynchronous]
– BS [IEC single phase]
Motor options
Thermistors and thermostat sensors
Independent forced cooling
Incremental, sin/cos absolute single/multi-turn encoders
Tropicalization
Anti-condensation heaters
Backstop
BONFIGLIOLI MAKE PLANATARY GEAR MOTOR—“300” SERIES
300M Series–Industrial Planetary Gearmotors& Units
Key benefits
– High torque density
– Extreme speed reduction and high output torque
– Low maintenance cost
– Extremely customizable
– High customization level
– Flexibility
– ATEX per explosive atmosphere 2G/2D
Main options
In line/right angle version
Independent cooling unit
Patented integrated cooling solution
Taconite seals
ATEX certification for explosive environments
Torque range
1,250…1,286,700 Nm (11,063 … 11,388,254 in-lb)
Gear ratios
3.4 … 2,916
Certifications
Certificate of compliance
Inspection certificate
ATEX
Brake options
Negative multi-disk brake
Output
Foot or Flange mounted
Splined shaft (solid, heavy duty, hollow, hollow with axial bloackage device)
Solid keyed shaft (solid, heavy duty, stirrer/mixer version)
Hollow shaft with double keyway or shrink disk
Motors
Input with solid shaft
Input with e-motor coupling:
– M, ME, MX [compact asynchronous]
– BN, BE, BX [IEC asynchronous]
– BSR [IEC reluctance]
– BS [IEC single phase]
Motor options
Thermistors and thermostat sensors
Independent forced cooling
Incremental, sin/cos absolute single/multi-turn encoders
Tropicalization
Anti-condensate heaters
Backstop
BONFIGLIOLI MAKE BEVEL GEARBOX—“RAN” SERIES
RAN Series– Right Angle Gear Units
Key benefits
– Cost effective solution
– Easy to fit
– Easy maintenance
– High positioning accuracy
– Minimized mounting space
Main options
Long life lubrication [Sizes from 8 to 25; 1 to 2R]
Gearbox supplied with oil [Sizes from 28 to 48]
Fluoro Elastomer oil seals
Output
Single/double output shaft configuration
Hollow output shaft configuration
Motors
Input with solid shaft Input with e-motor coupling:
HDP Series-Helical Parallel Shaft Heavy Duty Gear Units
Key benefits
– High transmissible power
– Robustness
– Mounting Flexibility
– High customization level
– Reliability
– ATEX for explosive atmosphere 2G/2D
Main options
Fan cooling, cooling coil, oil heater
External cooling unit
Backstop
Forced lubrication
Temperature and oil level sensors
Drywell
Taconite seals
Torque range
5,190…210,000 Nm (45,935 … 1,858,656 in-lb)
Gear ratios
7.1…500
Output
Single/double sided solid input shaft (metric or inch dims)
Keyed hollow shaft
Shrink disc
Motors
Input with solid shaft
Input with e-motor coupling:
– BN, BE, BX [IEC asynchronous]
– BSR [IEC reluctance]
Motor options
Thermistors and thermostat sensors
Independent forced cooling
Incremental, sin/cos absolute single/multi-turn encoders
Tropicalization
Anti-condensation heaters
C Series– In-line Gearmotors& Units
Key benefits
– Minimized mounting space
– Robustness
– Reduced standard backlash
– High dynamic and energy saving solution
– Wide output speed selection range
– ATEX gearbox for explosive environments 2G/2D
Main option
Surface protection up to C5
Double oil seals
Fluor Elastomer Seals
Reduced Backlash
Torque range
45 … 12,000 Nm (398 … 106,208 in-lb)
Gear ratios
2.6 … 1,481
Transmissible Mechanical Power
0.09 … 213 kW
Output
Feet or flange mounting, B14 flange
Metric or inch series solid output shaft
Motors
Input with solid shaft
Input with e-motor coupling:
– BN, BE, BX [IEC asynchronous]
TA Series–Specific Shaft Mounted Gearmotors& Units
Key benefits
– Cost effective solution
– High Reliability
– Robustness
– Very Compact design
– Prevent the movement in the wrong way
– Highly customizable product
Main options
Fluor Elastomer Seals
Backstop
Torque range
150 … 16,000 Nm (1,327 … 141,611 in-lb)
Gear ratios
5 … 33.2
Transmissible Mechanical Power
Up to 226 kW
S Series–Helical Single-Stage / Single stage gearbox
Key benefits
– Cost effective solution
– Minimized mounting space
– Robustness
– Reduced standard backlash
– High dynamic and energy saving solution
Main options
Gearbox supplied with oil [Size 50]
Surface protection up to C5
Fluor Elastomer oil seals
Torque range
21 … 200 Nm (185 … 1,770 in-lb)
Gear ratios
1.4 … 13.1
Transmissible Mechanical Power
0.09 … 11.6 kW
Output
Feet mounting
Flange mounting
BE Series-Asynchronous IE2 Three Phase motor
Key benefits
– Reduced operating cost
– Energy saving
– Compliant to all the MEPS
– Complete (Gearbox + Motor) Solution
– Control flexibility
– Global motor (can be utilized in most of the markets)
Degree of protection
Standard IP55
Conformity
Efficiency – IEC 60034-30:2008
Low Voltage Directive – 2006/95/EC
Electromagnetic Compatibility
Directive – 2006/95/EC
Power supply & Power range
Available voltages include
@50 Hz
230/400
290/500
400/690
290/500
@60 Hz
230/460
330/575
265/460
460/800
Power range
0.75 … 22kW
Mounting options
IM B3
IM B5
IM B14
Output
IEC
Motors
3 phase asynchronous
Motor options
• Thermistors and thermostat sensors
• Independent forced cooling
• Incremental, sin/cos absolute single/multi-turn encoders
• Tropicalization
• Anti-condensate heaters
• Up to IP56 protection
POWER RANGE
BE 80B | 0.75 KW
BE 90S | 1.1 KW
BE 90LA | 1.5 KW
BE 100LA | 2.2 KW
BE 100LB | 3 KW
BE 112M | 3.7 KW
BE 132S| 5.5 KW
BE 132MA| 7.5 KW
BE 160M | 11 KW
BE 160L| 15 KW
BE 180M| 18.5 KW BE 180L | 22 KW
Bonfiglioli make all types’ gearbox & motor spare
BHARAT BIJLEE MAKE–SAFE AREA / STANDARD MOTORS
EFFICIENCY—IE2 / IE3/ IE4
POWER RANGE –0.18 KW – 355KW
FRAME SIZE—63 –355
POLARITY – 2, 4, 6, 8
BHARAT BIJLEE MAKEFLAME PROOF / HAZARDOUS AREA MOTORS
EFFICIENCY—IE1 / IE2 / IE3
POWER RANGE –0.18 KW – 200KW
FRAME SIZE—80 –355
POLARITY – 2, 4, 6, 8
| Motor Type | Frame | Power (kW) | Polarity |
| Standard Range of Flame Proof Motors: Type Ex(d) | 80 to 315 | 0.37 to 200 | 2, 4, 6, 8 |
| Flame Proof Motors, Type Ex(d): Efficiency Class Complying to IE2 Class of IEC 60034-30-1 | 80 to 315 | 0.37 to 200 | 2, 4, 6, 8 |
| Flame Proof Motors, Type Ex(d): Efficiency Class Complying to IE3 Class of IEC 60034-30-1 | 80 to 315 | 0.37 to 200 | 2, 4, 6, 8 |
| Non Sparking Motors, Type Ex (nA) : Efficiency Class Complying to IE2 Class of IEC 60034-30-1 | 71 to 355 | 0.37 to 355 | 2, 4, 6 |
BHARAT BIJLEE MAKECRANE & BRAKE MOTORS
| Motor Type | Frame | Power (kW) | Polarity |
| Crane & Hoist Duty Motors | 71 to 355 | 0.37 to 400 | 4, 6, 8 |
| Brake Motors (With Integral DC Brake) | 71 to 132 | 0.37 to 9.3 | 2, 4, 6, 8 |
| Brake Motors (With External Mounted Brake) | 71 to 200 | 0.37 to 22 | 2, 4, 6 |
| Slip Ring Motors : Crane Duty | 100 to 160 | 1.1 to 10 | 4, 6 |
BHARAT BIJLEE MAKESPECIAL APPLICATION MOTORS
| Motor Type | Frame | Power (kW) | Polarity |
| Cane Unloader Motors | 160 to 225 | 11 to 30 | 6 |
| Textile Motors | 100 to 160 | 1.1 to 15 | 4, 6, 8 |
| Railway Auxilliary Motors | As per requirement | —- | —- |
Elecon make WORM GEARBOXES
SPECIFICATION RANGE
Size: 1 5/8” to 17”
Ratio: 5 to 4,900
Power: 0.10 to 350 kW
DESCRIPTION:
Under driven : SNU-U
Overdriven : SNU-O
Vertical output shaft up/down : SNU-V
Hollow output shaft : SNU-SM
Sizes : 1 5/8, 1¾, 2, 2½, 3, 3½,4, 5, 6, 7, 8, 9, 10.5
Ratio : Min. 5 : 1 to Max 70 : 1
Power Capacity : 0.10 –350 Kw
Application:
- Conveyors
- Raw Mill
- Coal Mill
- Nodulizer
- Apron Conveyors
- Elevator Drives
- Separator Drive
- Bulk Materials Handling
- Classifier
- Conveyor Drive
- Bucket
- Cane Carrier
- Cane Shredders
- Pressure Feeders
- Diffuser
- Crystalliser
- Rake Elevator / Elevator
- Feeder Table
- Cane Chopper
- Belt Conveyors
- Screw Conveyors
- Bucket Elevator
- Cooling Tower
- Air Preheater
- Slurry Pump
- Agitator
- Mixer
- Mixer Drive
- Calander Drive
- Extruder Drive
- Vertical Extruder Drive
COUPLINGS
SPECIFICATION RANGE
Size: 130 to 6,27,000
Power: 0.136 to 2,320 kW
Torque: 0.70 to 6,2070 KNm